9
8- VOLTAGE AND FREQUENCY
The NICK NRG 1200 CT can operate at 90-260 VOLT 50 or 60 Hz.
9- INSTALLATION
NICK NRG 1200 CT may be either floor or ceiling mounted.
For floor mounting installations, the NICK NRG 1200 CT is supplied with four rubber
mounting feet on the base.
For ceiling mounted installations, we reccomend the use of appropriate clamps to fix
the unit to the mounting surface.
The supporting structure from which the unit is hung should be capable of bearing the
weight of the unit, as should any clamps used to hung it. The structure should also be
sufficiently rigid so as not to move or shake whilst the NICK NRG 1200 CT is moving.
Four 1/4 turn Fast Locks connections placed in the base of the unit allow to hang the
NICK NRG 1200 CT by using the
Fast Lock “C” clamps provided in the box.
9.1- Safety cable
We recommend the use of a safety cable or chain connected to the NICK NRG 1200
CT and to the suspension truss in order to avoid the fixture accidentally falling should
the main fixing point fail.
Make sure that the iron cable or chain can bear the weight of the entire unit.
You may attach the safety chain/cord to the attachment point (A) located on the base
of the fixture, as shown in the picture below.
!
SAFETY CHAIN/CORD
ATTACHMENT POINT
A
