DTS MOON 1200, User Manual

Page: 7 / 12

TECHNICAL DATA
POWER SUPPLY: 230 V 50/60 Hz (115V 60Hz on request)
POWER CONSUMPTION : 1300 VA with built in PFC
LAMP: HTI 1200W/D7/60 discharge lamp (750 hours)
BASE: SFc-10-4
COLORS: CMY colour changer with dichroic f white
BEAM ANGLE: from 2,5° to 13°(mechanical Iris)
BLACK OUT
EXTRUDED ALLUMINIUM
WORKING POSITION: Horizontal 45°
WEIGHT:
15,5Kg +( 14,5Kg POWER BALLAST)
IMPORTANT SAFETY INFORMATION
Fire prevention:
1Moon 1200 uses a Osram HTI 1200W/D7/60 lamp. The use of any alternative lamp is not
recommended and will null and void the fixture's warranty.
2 Never locate the fixture on any flammable surface.
3 Minimum distance from flammable materials: 0.5 m.
4 Minimum distance from the closest illuminable surface: 2 m.
5 Replace any blown or damaged fuses only with those of identical value. Refer to the wiring
diagram if there is any doubt.
6 Connect the projector to mains power via a thermal magnetic circuit breaker.
Prevention of electric shock:
1 High voltage is present inside the unit. Isolate the projector from the mains supply prior to
performing any function which involves touching the inside of the unit, including lamp
replacement.
2 The level of technology inherent in the Moon 1200 requires the assistance of specialised
personnel for all servicing. Refer all work to your authorised DTS service centre.
3 A good earth connection is essential for proper functioning of the projector. Never connect the
unit without proper earth connection.
4 The fixture should never be located in a position exposed to rain or in areas of extreme
humidity.
5 A steady supply of circulating air is essential.
Protection against ultraviolet radiation:
1 Never turn the lamp on if any of the lenses, filters or mechanical parts are damaged. Their
respective shielding functions will only operate efficiently if they are in perfect working order.
2 Never look directly into the lamp when it is on.
SAFETY
1 The projector should always be installed with fixtures that are capable of supporting the
weight of the unit.
2 Always replace the lamp if any physical damage is evident.
3 Never install the fixture in an enclosed area lacking sufficient air flow.
ENG
360mm
450mm
870mm
ARC 1200
MOON 1200
7