DTS DOCTUS 1, User Manual, Page: 17 / 25

User Manual
Ver. 1.02 15 di 21
DOCTUS
4.5.3 Serial Connection
As stated in the previous paragraph, the serial connection of two or more DOCTUS FC or DOCTUS WH can be
done as seen below:
4.5.4 Maximum Distance
Should the PSU be moved away from the product, please consider the following:
•
Cable junctions and connections must be done by following the instructions as stated before in this
document.
• With “Drivenet” set at 700 mA – 48 V, and using cables of the same type of those included with the
product, it is possible to have a maximum distance between the PSU and the farthest device
(considering cable length) of 100 m.
5 Maintenance
D.T.S. Illuminazione Srl’s products are of higher quality and design, therefore must be treated with care.
The following recommendations will help you keep your warranty intact, to make the best possible use of the
product, and to maximize their lifespan:
•
Do not use the product (or products) before carefully reading this manual.
• Failing to comply with the instructions on this manual may cause injury or damage.
• Periodically check the status of the cables. Make sure the cables are not damaged.
•
Ensure that a sufficient air flow is given to the device, removing any obstruction that may prevent
proper cooling of the product.
•
DO NOT use aggressive chemicals, solvents or abrasive detergents to clean the product. For the
body, use a wet cloth. For the front panel, use window cleaning products.
• For the best duration of the product painting, periodic washing with fresh water is recommended.
Cleaning frequency varies in accordance with the salinity present in the place of installation Avoid high
pressure water jets.
•
If the product does not work the way it is meant to, please contact the nearest authorized support