PROFILO COMPACT
7.3 Blades insertion
To insert the blades on the unit, proceed as follow:
Locate the blades holder, place one side of the blade within the two parallel surfaces,
push and tilt it on the guide.
Warning:
8 OPENING THE PROJECTOR HOUSING
8.1 Back side
It is possible to inspect the inside of the projector by removing the cover as indicated below.
Remove mains power prior to accessing the projector’s internal
components.
1) Loose the screw and the knob located on the top back side of the unit (photo 1 and 2).
2) Remove the top back side cover (photo 3)
Blades holder
7.3 Blades insertion
To insert the blades on the unit, proceed as follow:
Locate the blades holder, place one side of the blade within the two parallel surfaces,
push and tilt it on the guide.
Warning:
8 OPENING THE PROJECTOR HOUSING
8.1 Back side
It is possible to inspect the inside of the projector by removing the cover as indicated below.
Remove mains power prior to accessing the projector’s internal
components.
1) Loose the screw and the knob located on the top back side of the unit (photo 1 and 2).
2) Remove the top back side cover (photo 3)
Parallel surfaces
screw and knob
Photo 1
Photo 2
Photo 3
10
