DTS DELTA 10 F, User Manual, Page: 8 / 28

8
DELTA 10 F
.7- VOLTAGE AND FREQUENCY:
Delta 10 F can operate at 90-260VAC, 50 or 60 Hz.
8- INSTALLATION:
10 F
10 F
10 F
8.1 Safety cable:
Delta may be either floor or ceiling mounted.
For floor mounting installations, the unit is supplied with four rubber mounting feet on the base.
For ceiling mounted installations, we reccommend the use of appropriate clamps to fix the unit to the
mounting surface.
The supporting structure from which the unit is hung should be capable of bearing the weight of the
unit, as should any clamps used to hung it. The structure should also be sufficiently rigid so as not to
move or shake whilst the Delta
is moving.
The Delta is fitted with 7 fixing points on the bottom used to attach accessories (clamps, hooks,
etc.)
.
We recommend the use of a safety cable or chain connected to the Delta 10 F and to the suspension
truss in order to avoid the fixture accidentally falling should the main fixing point fail. Make sure that the
iron cable or chain can bear the weight of the entire unit.
You may attach the safety chain to the holes located on the base of the fixture.
8.2- Protection against liquids
The projector contains electric and electronic components which should under no circumstances come
into contact with oil, water or any other liquid. The proper unit functioning would be compromised
should this occur.
8.3- Movement
The projector has a maximum movement of 90° for Tilt. DO NOT place any obstructions in the path of
the projector's movement.
!
90°
90°
!
WARNING
Do not place any object in the path
of the projector’s movement