16
FIRMWARE RELEASE
1.03
RDM Device Model ID
0x0D42
DMX Personality IDs
0x01 “7 CHANNELS”
0x02 “2 CHANNELS”
0x03
“FINE”
MAIN MENU
LEVEL 1
LEVEL 2
LEVEL 3
FUNCTION
Display normal orientation for
floor mounting position (Default)
Display inverted orientation for
suspended mounting position
Display always ON (Default)
Display goes OFF after 10 seconds
Allows to select 4 DMX channels
mode (Default)
Allows to select 1 DMX channel
mode
Allows to select FINE mode (2 DMX
channels)
Allows to select the value of the
delay (in milliseconds) for Dimmer
channel reaction to DMX or
Program variation.
Off = Instant response to DMX
variation.
4 = 100 ms Smooth response to
DMX variation (Default)
20 = 500 ms Smooth response to
DMX variation.
Allows to select Quadratic
current for linear light output
(Default)
Allows to select Linear current
output
Allows to adjust the PWM
frequency value (Hz) in order to
reduce flickering in the process of
your camera recordings.
Default = 610 Hz
Allows to increase the LED’s
current from 1470mA to 2100mA
Default = ON
Automatic mode without DMX
controller.
In Auto mode the unit do generate
DMX for slave units.
Dimmer level selectable by user as
on DMX channel 2 (DIMMER)
Default = 255
Shutter level selectable by user as
on DMX channel 1 (SHUTTER)
Default = 0
Esc from automatic mode menu
Slave mode.
The unit is forced to DMX address 1
and 7 DMX channels mode
receiving signal from the unit set in
Auto mode.
Esc from slave mode
Allows to select the internal fans
speed.
Standard mode: High fans speed.
Silent mode: Low fans speed for a
very low noise operation.
Default = SIL
No DMX action.
Keep last valid DMX signal
(Default)
LED ON @ 60%
LED ON @ 100%
Dimmer level selectable for White
Default = 255
Black-out