DTS 03.ART002, User Manual, Page: 9 / 20

9
9- FILTER HOLDER INSTALLATION
The Filter Holder for ARTEMIO PROFILE (code 03.ART015) and holographic filters
are available on demand.
1) To install the holographic filter remove the metal spring from the holder.
2) Put in place the holographic filter by keeping the microstructure faces inward.
3) Fix the holographic filter with the metal spring.
4) Put in place the Filter Holder on ARTEMIO and fix it by tightening the knob.
● Holographic filter soft-edge
(code 0506A132.D19)
● Holographic filter 60°x10°
(code 0506A092.D19)
Metal spring to fix holographic filter
Knobs to fix the Filter
holder