DTS 03.ART002 User Manual Download Page 6

 

 

5- ACCESSORIES 
 
Optional (on request) 
 

● Filter holder - black finishing (code 03.ART015) 
● Holographic filter soft-edge (code 0506A132.D19) 
● Holographic filter 60°x10° (code 0506A092.D19) 
● Gobo holder (code 03.ART007) 
● Shutter blade (code 03.ART016) 
● 2 x 0,5 mm

²

 cable (code 0509C120) 

● Constant current PSU 700mA 9-48Vdc *IP67 (code 0502T031) 
● Constant current PSU 500-1400mA 60W *Push Dimming *DALI *230Vac (code 
0514M240) 
● Constant current PSU 500-1400mA 60W *Push Dimming *DALI *100Vac (code 
0514M241) 
● “C” Clamp G50 (Max. Load 10 Kg) (code 0521A012) 
● Safety cable 3 mm x 60 cm, max capacity load 60 Kg (code 0521A010) 
 

Accessories for Electrified Rail mounting 

● Track adapter On-Off - black finishing (code 03.LA.232) 
● Track adapter DALI – black finishing (code 03.LA.233) 
● Track adapter Dimmer – black finishing (code 03.LA.234) 
 

6- IMPORTANT SAFETY INFORMATION 

 

6.1 Prevention from electric shock: 
 

Class II LED product according to standard EN 60598-1.  
 

6.2 Safety: 
 

Risk Group 2 product according to EN 62471. 
CAUTION. Do not look directly into the light output. May be harmful to the eyes and 
skin. 
 
Do not stare at the operating light source.  
The light source contained in this luminaire shall only be replaced by the manufacturer 
or his service agent or a similar qualified person. 
The unit is not for household use and must be installed by a qualified electrician or 
experienced person. 
LEDs are not replaceable. 
The external surface of the unit may exeed 50°C; never handle the unit until at least 5 
minutes have elapsed since the unit was turned off. 
Never install the unit in an enclosed area lacking sufficient air flow. 
 
Suitable for operation in ambient not exceeding 40°C.  

 
6.3 Waste Electrical and Electronic equipment (WEEE) directive: 
 

The unit, accessories and packaging should be sorted for environmetal-friendly 
recycling. 
For EC countries: according to the European Directive 2012/19/EC for Waste 
Electrical and Electronic Equipment and its implementation into national right, 
luminaires that are no longer usable must be collected separately and disposed of in 
an environmentally correct manner. 

Summary of Contents for 03.ART002





















Reviews: