18
1.3 How to edit the remote's settings without physical presence
The system allows to take advantage of functions such as copying the remote’s settings, changing the
button’s configuration, simple registering blockade, and deleting the remote without its physical presence - the only
thing needed is the remote's number. All the remotes data should be stored in the table - see page 32 or in the PC
file - see page 28. This possibility is very useful in the case of theft, for example or when a particular channel
number is to be changed and the configuration of the rest of the remotes must be updated.
The one difference between using the remote without and with physical presence is declaring it for the edition. All
the actions mentioned here are similar to the ones from 1.2.1 to 1.2.4 points.
To declare a remote for editing without physical presence:
a) press to go into programming mode,
b) press button while displays shows PP,
c) press button once more while the displays shows -3. The first serial number (of hundreds) will be shown on
the display. Use up-down buttons in the remote to set-up the proper value and left-right buttons to move
between the edited numbers of hundreds columns, tens, and ones columns. The hundreds reading as one
number, the tens parts, and ones of the number are shown side by side. (Two numerals: adequately shown
from left the tens and ones of the number),
d) press button to confirm. The display shows the setted serial number,
e) press button once more to confirm. You will get the access to the options for editing the remote.
Remember, the edited remote will be the one which serial number was manually setted-up in point c.
Follow points 1.2.1 to 1.2.4
A
A
A
A
A
Summary of Contents for RIVAL 434
Page 2: ......
