II. MEMO MANAGER - MEMO SOFTWARE
1. USAGE
MEMO MANAGER is a computer program designed to support the MEMO service programmer. The
program allows you to manage files used in working with the MEMO service programmer and edit the
contents of remote memory / number files. MEMO MANAGER software ensures full compatibility between
systems thanks to the support of remote controls files from various receiver models.
2. HARDWARE REQUIREMENTS
- a PC with MS Windows® version NT / XP / Vista / 7/8/10
- .net framework version 4.0 or higher required to be installed
3. INSTALLATION AND START-UP
Run the installation file Memo_setup.exe. The file is available for download on the manufacturer's website
www.dtm.pl. During installation, follow the program installer's guidelines. After installing the software,
start the MEMO MANAGER program and connect the MEMO programmer.
4. CONNECTING THE MEMO PROGRAMMER TO A COMPUTER
The programmer should be connected to the computer using the USB cable included in the set. The
programmer's readiness for operation is signaled by blinking of the BACKUP, WRITE and UPDATE LEDs.
During the connection with the computer the programmer buttons are inactive.
The MEMO programmer is recognized by the Windows® operating system as a mass memory with a
capacity of approx. 2 MB, from which you can read or write files. No driver installation required.
To operate the MEMO service programmer, it is recommended to use dedicated software -
MEMO MANAGER.
The power supply and readiness for operation is indicated by the pulsing of the BACKUP, WRITE and
UPDATE LEDs on the MEMO service programmer panel.
10
