DTK PAM-0073I, User Manual

Page: 40 / 48

Chapter 4
34
Assign IRQ to PCI VGA Card
Set this option to Yes if the PCI VGA used IRQs. AMIBIOS will assign an IRQ to PCI VGA
adapter cards. Set this option to No if the PCI VGA card do not use IRQ. The settings are Yes or
No. The Optimal and Fail-Safe default settings are Yes.
DMA Channel 0/1/3/5/6/7
These options specify the DMA Channels are used on. These options allow you to specify DMA
Channels for use by legacy ISA adapter cards.
These options determine if AMIBIOS should remove a DMA from the pool of available DMAs
passed to BIOS configurable devices. The available DMA pool is determine by reading the
ESCD NVRAM. If more DMAs must be removed from the pool, the end user can use these PnP
setup options to remove the DMA by assigning the option to the ISA/EISA setting. Onboard I/O
is configurable by AMIBIOS. The DMAs used by onboard I/O are configured as PnP.
The settings are PnP or ISA/EISA. The Optimal and Fail-Safe default settings are PnP.
IRQ3/IRQ4/IRQ5/IRQ7/IRQ9/IRQ10/IRQ11/IRQ12/IRQ14/IRQ15
These options specify the bus that the named interrupt request lines (IRQs) are used on. These
options allow you to specify IRQs for use by legacy ISA adapter cards.
These options determine if AMIBIOS should remove an IRQ from the pool of available IRQs
passed to BIOS configurable devices. The available IRQ pool is determined by reading the
ESCD NVRA. If more IRQs must be removed from the pool, the end user can use these PCI/PnP
Setup options to remove the IRQ by assigning the option to the ISA/EISA setting. Onboard I/O is
configurable by AMIBIOS. The IRQs used by onboard I/O are configured as PCI/PnP.
The settings are PCI/PnP or ISA/EISA. The Optimal and Fail-Safe default settings are PCI/PnP.
Reserved Memory Size
This option specifies the size of the memory area reserved for legacy ISA adapter cards.
The settings are Disabled, 16K, 32K, or 64K. The Optimal and Fail-Safe default settings are
Disabled.
Reserved Memory Address
This option specifies the beginning address (in hex) of the reserved memory area. The specified
ROM memory area is reserved for use by legacy ISA adapter cards.
The settings are C0000, C4000, C8000, CC000, D0000, D4000, D8000, or DC000. The Optimal
and Fail-Safe Default settings are C0000.