DTK PAM-0070S, User Manual

Page: 54 / 72

Chapter 6
48
6.3 RUNNING THE PROGRAM
6.3.1 INSTALLATION
There is no special installation program. You may run the program ZVHDD.EXE
from your hard drive or from a diskette.
When you install ZVHDD, it creates either a binary file or a hard drive partition as
you select, in which to store a saved session.
Note: If you plan to store session data in a separate partition, create a bootable
diskette and run ZVHDD from the bootable diskette, because
partitioning the hard drive may destroy all existing data on the drive.
To install the program, type the following at the DOS prompt.
ZVHDD/C /file /M:memory_size
OR
ZVHDD/C /partition/M:memory_size
where
/C Creates a file or a disk partition for session data
storage
/file Specifies a storage file name SAVE2DSK.BIN. This
is a hidden file.
/partition Specifies a disk partition for storage of session data.
Note: Creating a disk partition may cause loss of existing data on the
hard drive. We recommend this method only for new systems
with no data on the hard drive.
/M:memory_size Specifies a number from 1 to 256 to select the size in
megabytes of the file or partition.