DTK PAM-0070S, User Manual, Page: 39 / 72

Award BIOS Setup Guide
33
ISA Bus Clock Frequency: It is used to select the bus clock for the ISA bus. The available
options are “7.159MHz”, “CPUCLK/4” and “CPUCLK/3”.
CPU Speed ISA Bus Clock Frequency
75MHz CPUCLK/3
Other than 75MHz CPUCLK/4
VGA Shared Memory Size: If external VGA card is installed, this option will not be shown. It
is used to select the video ram size shared with the system memory, the available options are
“0.5MB”, “1MB”, “1.5MB”, “2MB”, “2.5MB”, “3MB”, “3.5MB” and “4MB”.
VGA Memory Clock (MHz): If external VGA card is installed, this option will not be shown. It
is used to select the VGA memory clock frequency of the on-board graphics controller used. The
available frequency ranges from 40MHz to 70MHz. The default value is 55MHz.
TV mode selection: Select TV mode PAL or NTSC.
4.5 POWER MANAGEMENT SETUP MENU
The Power Management Setup option is used to change the values of the chipset
registers for system power management functions.
ROM PCI/ISA BIOS (2A5IIG3B)
POWER MANAGEMENT SETUP
AWARD SOFTWARE, INC.
Power Management
PM Control by APM
Video Off Option
Video off Method
Switch Function
Suspend Option
MODEM Use IRQ
Hot Key Power Off : User Define
: Yes
: Susp, Stby
→
Off
: V/H SYNC+Blank
: Break/Wake
: Static Suspend
: 3
: Enabled
HDD Ports Activity
VGA Activity
IRQ3 (COM 2)
IRQ4 (COM 1)
IRQ5 (LPT 2)
IRQ6 (Floppy Disk)
IRQ7 (LPT 1)
IRQ8 (RTC Alarm)
IRQ9 (IRQ2 Redir) : Enabled
: Enabled
: Enabled
: Enabled
: Enabled
: Enabled
: Enabled
: Disabled
: Enabled
**PM Timers** IRQ10 (Reserved) : Enabled
HDD Off After
Suspend Mode : Disabled
: Disabled IRQ11 (Reserved)
IRQ12 (PS/2 Mouse)
IRQ13 (Coprocessor) : Enabled
: Enabled
: Enabled
**PM Events** IRQ14 (Hard Disk) : Enabled
COM Ports Activity : Enabled IRQ15 (Reserved) : Enabled
LPT Ports Activity : Enabled
ESC: Quit
↑ ↓ → ←
: Select Item
F1: Help PU/PD/+/-: Modify
F5: Old Values (Shift)F2: Color
F7: Load Setup Defaults
Fig. 22