DTI Dyna Technology Winco W3000H, Installation And Operator'S Manual

Page: 9 / 12

9
1203-00 60706-220
TROUBLESHOOTING HINTS
PROBLEM (SYMPTOMS) POSSIBLE
CAUSES
———————————————————————
Won’t Start
*Low Oil Level.
*Fouled spark plug.
*Out of fuel.
*Off switch in Off position.
———————————————————————
Voltage too low
*Engine speed is too low.
*Generator overloaded.
*Defective stator.
*Defective rotor (fi eld).
———————————————————————
Circuit Breaker
*Defective load.
Trips *Defective receptacle.
———————————————————————
Voltage too high
*Engine speed is too high.
———————————————————————
Generator
*Overloaded.
overheating *Insuffi cient ventilation.
———————————————————————
No output voltage
*Short in load (disconnect).
*Broken or loose wire.
*Defective receptacle.
*No residual magnetism
(in generator).
*Defective stator.
*Defective rotor (fi eld).
*Shorted capacitor.
*GFCI Receptacle tripped.
———————————————————————