DTE PedalBox, Manual

Page: 29 / 50

Safety instructions
Please read through the following information
We recommend the installation by a car specialist .
Never install or remove the PedalBox system with the key in the ignition or the ignition system active.
Always switch off the ignition and wait 5 minutes for all electrical systems to power down and fully discharge.
Make sure that all cables are laid so that they cannot influence the operation of the pedals. Fasten the cable
under the cover, if necessary also use cable ties .
Position the PedalBox with the enclosed mount on the dashboard in the driver‘s field of view (see page 20) , to
avoid unintentional or unnoticed operation of the buttons , even by passengers.
Change the PedalBox settings while your car is stationary . By carefully pressing the accelerator pedal you get
a feel for the sensitivity of the accelerator pedal.
Most vehicles have a different acceleration and accelerator behavior. Therefore, be careful and always set the
configuration of the PedalBox only in small steps (+1 or -1).
Never start the PerfecTune configuration while driving .
Always pay attention to road traffic .
If you have questions regarding installation and safety, please contact your authorized dealer immediately.
29
dystrybutor