DTDAUTO TECHNOLOGY TEAM, INSTITUTE OF PHYSICS, VIETNAM – EDITED 23/03/2020
www.dtdauto.com
29
If upgrading ECM is not successful then the screen displays as below
You check connection and repeat the checking steps.
- Disconnect DLC cable between DLC diagnostic connector on motorcycle and MOTOBOX
- Reset the supply power for MOTOBOX
(unplug power cable for 30 seconds then reconnect)
- Turn OFF and turn ON ignition key then reconnect DLC cable
NOTES:
You turn off and turn on ignition key to have finished upgrading ECM
(this is obligatory)
.
