AEON-LT HEVC 4K Transmitter
Commercial in Confidence
Revision: 1.0
The information contained in this document is the property of Domo Tactical Communications (DTC) Ltd.
Any copying or reproduction in any form whatsoever is prohibited without the written permission of DTC.
© 2018 Copyright Domo Tactical Communications (DTC) Limited. All rights reserved.
Page 9-19
9.
Appendix C – Safety and Maintenance
9.1
Cautions and Warnings
Note
: The following guidelines may or may not be applicable to your product. However, we would ask that
you read them to assess their relevance.
Area
Note
Enclosures
Do not remove any factory installed screws or fastenings. Damage to the units
may result and void any warranties.
Only authorised, trained personnel should open the product. There are no
functions that require the user to gain access to the interior of the product. There
are no user serviceable parts inside.
Maintenance
Other than cleaning, no scheduled maintenance is required to ensure proper
function of the unit.
Environment
The equipment should not be used in hazardous or corrosive atmospheres. Users
are reminded of the necessity of complying with restrictions regarding the use of
radio devices in fuel depots, chemical plants and locations where explosives are
stored and/or used.
Power supply
Ensure that the power supply arrangements are adequate to meet the stated
requirements of each product. Observe all electrical safety precautions.
Electro static
discharge
precautions
ESD guidelines must be followed for this electrostatic sensitive device.
Lightning strike
There is a risk of lightning strike to antennas. The equipment should not be
assembled in an area at the time of lightning activity. Antennas should be
adequately protected from lightning strikes.
Working at height
Observe caution when locating the device at height, for example on a mast.
Ensure the unit is well secured to prevent it falling and injuring personnel.
Risk of eye injury
Care should be taken to avoid eye contact with the antennas.
Cables
Connecting cables should not be positioned where they are likely to become
damaged or where they may present a trip hazard.
Thermal control
system
Any powered device will always produce heat as a by-product of its operation. If
you operate this device in an enclosed space you must ensure it has adequate
airflow to keep it cool.
Also, if worn close to the body, care must be taken to protect the operator from
excessive temperatures.
RF emission system
When using this device please ensure a distance of 20cm is maintained between
your device and your body while the device is transmitting.
Aircraft safety
Use of this equipment on board aircraft is strictly forbidden, unless confirmed as
safe by the aircraft operator.
Use of radio transmitter equipment in an aircraft can endanger navigation and
other systems.
