32
Only for spokes in the inner spoke holes of the hub
flange:
5. Fully loosen the spoke (green) opposite the spoke
head of the spoke (red) that needs to be replaced.
TIP: Mark the spokes with a piece of tape.
Only for spokes in the inner spoke holes of the hub
flange:
6. Push the opposite spoke (green) slightly to the
side and unthread the spoke to be changed (red).
If the spoke cannot be pushed out of the hub
flange, the spoke crossing the opposite spoke
and the spoke to be changed (blue) can also be
loosened.
7. Remove the spoke.
8. Push the new spoke through the spoke hole in the hub and insert the spoke through the spoke hole in the
rim.
→
Observe the correct spoke crossings.
9. Lightly grease the nipple, put the PHR Washer on the nipple and screw the nipple onto the spoke (“4.3
Changing a spoke: Basics“ on page 27).
10. True the wheel.
