SPLINE
®
Wheels - Technical Manual
34
Ma
in
te
na
nce
of
t
h
e
Re
ar
W
h
e
e
l Hu
b
[T
hr
ee
Pa
wl
Sys
te
m
]
V2
01
6.
0
5
3.
Slide the rotor (fig. 4-2/7) onto the hub while
performing a rotary motion.
4.
Check if the rotor can be turned easily and if the
pawls lock.
5.
Grease the bearings and the inner surface of both
end caps (fig. 4-2/1, 8).
6.
Put on both end caps (fig. 4-2/1, 8) and push them
in by hand.
Caution: The shorter end cap must be attached on the
drive side.
Closing Steps
Link
Mount the cassette.
see instructions of the manufacturer
Mount the brake disc.
