SPLINE
®
Wheels - Technical Manual
18
Con
vert
ing t
h
e
Hu
b [
S
cre
w
e
d
on
En
d Ca
ps]
V2
01
6.
0
5
Assembling Bearings and Axle
3.
Clamp the axle with the special strap into the vise.
4.
Unscrew the end cap and remove it.
20 mm, 15 mm und 9 mm end caps:
22 mm open-end wrench
QR end caps: 5 mm Allen key
5.
Remove the bearing from the axle.
1.
Slightly grease the seating of the bearings and the
inner surface of the hub shell using multipurpose
grease.
