Start Up
If the power up (from Standby mode or otherwise) is successful, the appropriate interface will be displayed
after a launch sequence of several seconds. The wireless LAN connection may take 10-15 seconds to be
established.
Configuring the Mobile Tablet
The DT380CR may be configured using the utilities and methods dictated by the software operating system.
The DT380CR should be configurable for various properties such as user profiles, network features, and
several system elements.
Wireless Networking
Wireless LAN
The DT380CR is often delivered with an embedded (user-inaccessible) 802.11ac WLAN adapter equipped
with a hidden custom antenna.
•
Through the support of typical WLAN adapters, the DT380CR should be able to detect all 802.11 access
points in the vicinity for you to select the access point of your choice for connection.
•
The SSID and WEP/WPA/WPA2 (if enabled) parameters on the DT380CR and the access points have to
match. The SSID is case-sensitive and it is recommended that you enable WEP/WPA/WPA2 encryption (or
advanced alternatives) for secure access.
•
When WEP/WPA/WPA2 is enabled, you may need to consult your network administrator or your
networking equipment literature to properly configure associated settings such as Authentication mode, etc.
•
Refer to the access point operating manuals for setting up the 802.11 access points.
ENGLISH
5
DT380CR
