DSX Access System, Inc. WinDSX, User Manual

Page: 115 / 116

Message Definitions
107
Guard Tour Restarted The Guard Tour was restarted by an operator in Workstation.
Input ABNORMAL An input has become faulted. (door open)
Input NORMAL An input has returned to normal. (door shut)
Insufficient memory at remote The field controller does not have enough memory to hold the data being sent.
Location Communication Loss The system has lost communication the master field controller. Call for Service
Location Communication Restoral The master field controller has regained communication.
Location Password Failed
A dial-up modem location has a password different than the system software.
Log Report Request from Location The controllers memory is full and is requesting the PC to take a stored event.
Memory Stack OverFlow !!!
The panels processor stack has overflowed. Call for Service.
Message RETRY There has been a disruption in communication and the system is trying again.
Modem Hang Up ERROR The modem disconnected abnormally.
Open (tz) The door unlocked via its preprogrammed door schedule.
Operator Comment The operator has selected/entered message as to the occurrence of an alarm.
Operator Comment Text The comment selected or entered by the operator follows this header.
Opr set Device: Disabled A reader and/or keypad was manually disabled by the operator.
Opr set Device: TZ A reader and/or keypad was manually set to follow it time zone (schedule).
Opr set input: ALL ARM The operator manually armed all alarm points in the system.
Opr set input: ALL BYPASS The operator manually bypassed or disarmed all alarm points in the system.
Opr set input: ALL TZ The operator set all alarm point to follow their time zones (schedules).
Opr set input: ARM The operator manually armed the alarm point selected.
Opr set input: BYPASS The operator manually disarmed the alarm point selected.
Opr set input: TZ The operator set the alarm point to follow its time zone (schedule).
Opr set output: ACCESS The operator manually unlocked the door for the normal unlock time.
Opr set output: ALL OPEN The operator manually unlocked all doors and opened all outputs in the system.
Opr set output: ALL SECURE The operator manually locked all doors and secured all outputs.
Opr set output: ALL Time Zone The operator manually set all doors to follow their time zone (schedule).
Opr set output: OPEN The operator manually unlocked the door or set the selected output open.
Opr set output: SECURE The operator manually locked the door or set the selected output secure.
Opr set output: TZ The operator set the door back to its time zone (schedule).
Parameter Load request The Master Controller has been reset and is requesting a download from the PC
Parameter Load SUCCESSFUL The Master Controller has successfully received a download.
Phone connection failure There has been a phone connection lost to a dial-up modem site.
Remote Event Log OVERFLOW The panel has stored events offline to the point the oldest are being overwritten.
Restoral This is the inverse of alarm. The condition has returned to normal.
Secure (tz) The output has secured by time zone (schedule).
Serial Port FAILURE The serial communications port of the PC has failed. Call for Service.
Slave Checksum Discrepancy A slave controller’s download is not complete or correct.
Slave Download Complete A slave controller has received a full download and the download is finished.
Slave Parameter Request A slave controller has been reset and is requesting a download.
Starting Full Parameter Load A full download is being initiated from the PC to the master field controller.
Starting Incremental Update A download of the changes made to the database starting from PC to master.
System operations Midnight routine that activates and de-activates cards and performs backups.
Trouble Restoral An input point with a circuit fault has returned to normal.
Trouble: Circuit Open An input point has detected an open circuit. Call for Service.
Trouble: Circuit Shorted An input point has detected a short circuit. Call for Service.
TZ change .. overridden An input or output was set manually when a time zone (schedule) tried to start.
Unknown Event Type No definition.