Appendices
51
To use History mode:
1.
Press
Ctrl-F9
. The mode will display as History.
2.
Press one of the following key combinations to perform the indicated action:
•
Home
: Move to the top of the buffer.
•
End
: Move to the bottom of the buffer.
•
Page Up
: Move up one buffer page.
•
Page Down
: Move down one buffer page.
•
Up Arrow
: Move up one buffer line.
•
Down Arrow
: Move down one buffer line.
•
Ctrl-F8
: Enters Configuration mode. The Configuration screen will appear.
•
Ctrl-F9
: While in Configuration mode, return to the previous screen with History
mode enabled.
•
Ctrl-F10
: While in Configuration mode, return to the previous screen with On-Line
mode enabled.
•
Ctrl-F11
: Clears the history buffer. If you choose this option, a warning screen will appear.
Press
Enter
to delete the history buffer, or
Escape
to cancel the action. The previous
screen will reappear.
3.
When finished, press
Ctrl-F10
to exit History mode and return to On-Line mode.
DSRIQ-SRL module pinouts
Table C.1: DSRIQ-SRL Module Pinouts
DB9-F
Pin
Host Signal
Name/Description
Signal Flow
SRL Signal
Name/Description
1
DCD - Data Carrier Detect
Out of SRL
DTR - Data Terminal Ready
2
RXD - Receive Data
Out of SRL
TXD - Transmit Data
3
TXD - Transmit Data
In to SRL
RXD - Receive Data
4
DTR - Data Terminal Ready
In to SRL
DSR - Data Set Ready
5
GND - Signal Ground
N/A
GND - Signal Ground
6
DSR - Data Set Ready
Out of SRL
DTR - Data Terminal Ready
7
RTS - Request to Send
In to SRL
CTS - Clear to Send
8
CTS - Clear to Send
Out of SRL
RTS - Request to Send
9
N/C - Not Connected
N/A
N/C - Not Connected
