28
DSR Switch Installer/User Guide
4.
Type the first few characters of a target device name or port number to scan. The first matching
target device will appear in the line.
-or-
Press the following keyboard commands in the Name, Port or Time column to move through
the list of target devices available to scan.
a.
Press
Alt+Down Arrow
to move the cursor down through the list of target devices.
b.
Press
Alt+Up Arrow
to move the cursor up through the list of target devices.
c.
Press
Alt+Home
to move the cursor to the first target device in the list.
d.
Press
Alt+End
to move the cursor to the last target device in the list.
5.
In the Time column, type the number of seconds (from 3-255) of desired time before the scan
moves to the next target device in the sequence.
6.
Move the cursor to the next line or press
Down Arrow
and repeat steps 2-5 for each of the
remaining target devices to be included in the scan pattern.
7.
Click
OK
.
To remove a target device from the Scan list:
1.
In the Scan
dialog box, click the target device to be removed.
2.
Press
Delete
.
-or-
Press
Shift+Delete
to remove the selected target device and all entries below it.
3.
Click
OK
.
To start the Scan mode:
1.
If the OSCAR interface is not open, press
Print Screen.
The Main dialog box will appear.
2.
Click
Commands
. The Commands dialog box appears.
