*
*
IP Network Ceiling Speaker
5
IV. IP Address Setting of the Terminal on the Host
4.1 IP Address Setting
This speaker can be customized to modify the network parameters. Please read this section carefully if
you need to use this function. The alteration methods are as follows:
Method 1
：
1. IP address of host / computer alteration requires IP address of host / computer and the terminal address on
the same network segment. The terminal IP address is attached to its body when it leaves the factory.
Please pay attention to the IP address on its body. For example, the terminal IP address is 192.168.40.5,
while the IP address of host / computer should be 192.168.40.XX (Note: the setting IP can not appear IP
conflict phenomenon);
2. Enter the IP address of the terminal on IE browser after connecting host / computer and the terminal, and
then access the below as shown in Pic. 1. The default username: admin, and the password: 123456, and
then click “OK” to enter the following interface (as shown in Pic. 2);
3. Click the “Save” button to display the words “Terminal parameters setting success” at the top of the
window after altering the terminal IP address or server address on “Network configuration”.
(Pic. 1)
