*
*
IP Network Ceiling Speaker
8
V. Installation
Dimension
Mounting hole
Just 120mm above your ceiling.
1. Cut a diameter of 170-175mm mounting hole on the ceiling (as shown above).
2. Adjust the spring clip locating bolt to make the height of the spring clip adapted to the ceiling with
different thickness:
Locating pins are located in the upper hole, the middle hole, the lower hole to suitable for the ceiling of
20mm above, 10-25mm and 15mm below respectively.
3. Insert the spring clip on both sides of the speaker into the mounting hole, then release, and push the
speaker into the ceiling (see below).
To avoid spring pinch, it is recommended to wear gloves when
doing this.
4. Finally, check that it is secure and reliable.
DC/+15V
PoE INPUT
Mircos SD
SPEAKER
OUTPUT
+
DC/+15V
PoE INPUT
Mircos SD
SPEAKER
OUTPUT
+
1
2
3
4
DC/+15V
PoE INPUT
Mircos SD
SPEAKER
OUTPUT
+
162mm
185mm
11
4m
m
170-1
75mm
DC/+15V
PoE INPUT
Mircos SD
SPEAKER
OUTPUT
+
DC/+15V
PoE INPUT
Mircos SD
SPEAKER
OUTPUT
+
1
2
3
4
DC/+15V
PoE INPUT
Mircos SD
SPEAKER
OUTPUT
+
162mm
185mm
11
4m
m
170-1
75mm
