background image

               

Matters needing attention 

Please read the following before operating the product. 

Warning 

The following basic requirements must be strictly observed, to avoid potential personal injury and 

equipment or property damages to you or any person nearby. The basic requirements include without 

limitation to the following: 

Power source/power cable 

• Please disconnect the device from power source 

by pulling the plug other than the power cord. 

Pulling the power cord may result in damages. 
• Please keep the power cord away from heat source. 

Do not over-bend the power cord or place it 

anywhere it can be stepped on or may cause to trip. 
• This is connected to power source via the plug and 

any failure or danger occurs, the user can 

disconnect the device from power source by pulling 

out the plug out from the socket, therefore, it is 

required that the power socket should be located 

somewhere with easy access. 
• The device is not completely disconnected from 

power source when it is switched "OFF". For sake 

of safety, please disconnect the device from the 

socket if it is not in user. 

Positioning 

• Please disconnect the device from power source 

before relocating the device. 
• For avoiding deformation of panels and damages 

to internal components, please do NOT place the 

device where there is heavy dust or violent 

vibration, or where it is extremely cold or hot. 
• Please keep this device off water drops or splash 

or vase filled with water or any other articles of 

similar nature. 

Connection 

• Please disconnect other equipment from power 

source before they are connected to this product. 

Please tune volume to its minimum level before the 

device is powered ON or OFF. 
•  All  terminals  on  the  device  marked  with 

  are 

live  and  dangerous,  and  should  be  connected  by 
trained personnel. 

When abnormal conditions are realized 

• Please disconnect the device from power source 

immediately in case the power cord is worn or 

damaged or if the sound is suddenly cut off or any 

abnormal odor or smoke comes out from the device, 

and then have the device inspected and repaired by 

professional personnel.

 

Precautions in Operation 

• Please do NOT insert any finger into any gap or 

opening of the device. 
• Please prevent foreign objects (paper, plastics or 

metal etc.) from being inserted or falling into any 

gap or opening of the device. In such case, please 

cut off power source immediately. 
• Please do NOT put the body or any heavy object 

on the device and do NOT operate the buttons or 

switches or connections with excessive force. 

Do NOT open 

• Please do NOT remove the cover of the equipment, 

otherwise you may get an electric shock. 
• Do NOT attempt to remove any internal 

component from the device, or to modify the 

equipment in whatever manner. In case of any 

abnormal condition, please stop using the device 

immediately and have it inspected and repaired by 

professional personnel. 

                     

   

Other Precautions 

• Our company shall not be responsible for data loss 

or damages due to improper use of unauthorized 

modification to the device. 
• The images and screen display in this Manual are 

only for description and may be different from 

screen images in actual operation. The screen 

display depends on the product.

 

Summary of Contents for MP212U













Reviews: