background image

*         

LY

          * 

Multi-room Music System 

  Operation of System 

1. 

Status upon Turning on the System 

Connect the  system  according  to  the  wiring  diagram  and  turn  on  the  power  supply,  and  the  power 

indicator  will turn  on.  If  no  zone  is  turned  on  after  the  system  is turned  on,  the  system  will be  in 

standby status and the  display  will show the standby  interface (as shown in Fig. 1-1), where if the 

digital  wheel  is  turned  or  a  zone  or  source  key  is  pressed  down,  the  corresponding  operation 

interface or the one as shown in Fig. 1-2 will be accessed. 

 

 

 

(Fig. 1-1)

 

(Fig. 1-2)

 

2. 

Manual Operation of a Zone 

Operation of a zone includes control of a zone switch, selection of an audio source, and adjustment 

of volume and tone. Procedure of operation is as follows: 

 

Access to  zone operation  interface: Select a  zone  by  turning  the  digital  wheel when  the  main 

interface is shown (as shown in Fig. 2-1), and then press down the digital wheel once to access 

the  zone  control  interface  (as  shown  in  Fig.  2-2)  where  above-mentioned  setting  can  be 

performed. 

 

Selection of an audio source: Turn the digital wheel to highlight (i.e. the item is highlighted by 

the cursor) the content in the box following the “Program” and press down the wheel once, and 

a        icon will be shown. Turn the wheel again to show up to 6 audio sources successively. In 

case that  the  source  desired  is  highlighted,  stop  turning  the  wheel,  and  press  down  the  wheel 

again to assign the highlighted source to the zone. 

 

Adjustment of volume: Turn the digital wheel to highlight the content in the box following the 

“Volume”,  and  press  down  the  wheel once.  Turn  the  wheel clockwise  or  counterclockwise  to 

move the slider leftwards or rightwards for adjustment of zone volume. The bass and treble can 

be adjusted in the same way. 

 

To  end  the  operation  above,  turn  the  digital wheel  to  highlight the  “OK”  button,  and  press it 

once to apply and exit. 

Operation for other zones can be performed in the same way. 

 

Wed 16

:

55

:

08 

Fri 

20:08:08 

 

TUNER 

ZONE1

 

 

ZONE2 

Off 

MP3 

Wed 16

:

55

:

08 

Fri 

20:08:08 

 

TUNER 

ZONE1

 

 

ZONE2 

Off 

MP3 

Off 

 

Summary of Contents for HS-3402



























Reviews: