2
DSM Noisemaker OmniCabsim
Tweakable Cabinet Simulator
Thank you for purchasing the best cabinet simulator available. This device will help you to achieve the sound of
standard cabinets and further, allowing you to tune the characteristics of a speaker and cabinet to your own taste,
and not being limited by presets of classic, common cabinets.
What is a Cabinet Simulator?
A cabinet simulator is a device designed to emulate the frequency response of a speaker system. Guitar and bass
speaker systems have a very pronounced filtering effect, rolling off the low and high frequencies very sharply due to
their physical and electrical properties. Things like cone size, material, impedance, enclosure size and type, even
distance from a wall, affect these filters very noticeably.
A typical cabinet simulation consists on a steep roll off of the low frequencies under 70-100hz , an even steeper roll
off of highs over 5kHz, and some mid frequency attenuation, for example a typical Celestion v30 simulation looks like
this:
Features:
The Philosophy behind the design is to allow the user to CREATE their own cabinet response settings, moving away
from the typical preset cabinet simulators in the market. This approach let the musician to define his own sound and
getting an accurate reproduction of it when recording and playing live gigs, without depending on mic placement,
amplifier or cabinet availability.. Just dial in your favorite tone, tune your cabinet response and go straight to the PA
or recording gear.
-
Mic and Line output.
Compensate levels with the gain control.
-
Tunable high frequency response
emulates the steep low pass filter that different speakers produce.
-
Tunable Low frequency response
that controls the low end roll off typical of speaker of various sizes.
-
Tunable low frequency resonance
lets you dial the resonance of the low end roll off point, reproducing the
effect of closed or open back cabinets, and anything in between.
-
Mid control
lets you dial “modern” or “vintage” responses.
-
Punch control
boosts the 800 Hz band, that lets you cut through the mix with warmth.
Summary of Contents for omnicabsim
Page 1: ...1 ...
