Document:
RE-TCC7 0B8
Document:
RE-TCC7 0B8
Update:
February 2008
Update:
February 2008
Page:
2
Page:
2
OWNER'S MANUAL
RE-TCC7 22X Zoom Camera
Camera Configuration
Pressing the
MENU button to display menu
configuration that is composed of several items that can be selected with the UP / DOWN and
ENTER keys. If you control the camera from a remote keypad you can be accessed by calling the
menu
PRESET: 95.
menu
PRESET: 95.
The menu consists of 3 pages.
We are described below one by one all the programming entries
white Balance
In this section there are the color options B / N and the white balance, an important function to
make the white color of the image always such in any type of lighting.
COLOR - 4 programmable options: OFF = black / white image, ON = color image, AUTO =
image, usually color, switches to B / W automatically if there is insufficient light (DAY / NIGHT
function). EXT = Not used
WB - White Balance. The camera offers two options Balance: ATW and AWB. Selecting
ATW you enable automatic balancing AUTO TRACKING, recommended for most applications,
which by monitoring the continuously balancing provides the best fidelity possible white. Selecting
AWB instead enables the conventional automatic balancing that against offers for a reaction rate
higher than the change of the type of lighting.
Whether for ATW AWB option that you can adjust the balance level from red to blue
GAIN - Gain adjustment separate color for RY (red) and BY (blue).
Iris
In this section there are the options for the iris control. E 'can set the auto iris function
(Parameters PEAK and ALC) or the electronic iris (AES).
PEAK - This option allows to adjust the responsiveness of the auto iris function (automatic
aperture). If the option is left OFF the auto iris function based on the average brightness of the
image (AVERAGE). Activating the peak option instead of the iris is regularly scheduled basis to
highlight areas based on the level control that can be set. The adjustment is effective in the case
of images with a lot of contrast composed of dark areas to other more bright.
- ALC (Automatic Light Compensation) Setting this parameter to AUTO mode activates the
dell'Autoiris functionality and you can adjust the level. The lens iris opens and closes depending
on the ambient light,
Alternatively, it is possible to set an opening of the fixed diaphragm (FIX) and then work with the
electronic iris (AES) below.
AES - E '
the electronic shutter speed
(Shutter). E 'possible to make it act in automatic mode, with automatic level control, or set a fixed
electronic shutter speed from 1/100 sec. to 1/10000 sec.
CAUTION: ALC and AES are alternative, as in a separate optical cameras. If you want to use the
auto iris diaphragm (ALC = AUTO) automatically the AES parameter will be compulsorily fixed. If
instead you want to use the electronic iris (AES = AUTO), the iris will be fixed. The Convenience
In dell'autoiris or the AES depends on the type of lighting.
AGC Sens
In this section there are the options related to the automatic gain control (AGC), which optimizes
the vision in low light.
AGC - Sets the automatic gain control level. Most AGC will mean more brightness in dim
light, but also more noise in the image due to amplification of the signal. 9 levels available, from 0
to 24 dB.
SENS - Sets the Digital Slow Shutter function (DDS), which allows to maximize the yield
with minimum brightness condensing more frames into a single image and then increasing in a
drastic way the brightness of an image even almost dark. You can adjust 9 levels of integration
from 0 frames to 36 frames. Increasing the frame the camera integration level will reduce the
refresh time of the image but will increase the resilience with minimum brightness.
Backlight
In this section you set the parameters related to the backlight compensation (BLC) function useful
in case of recovery of dark subjects on background is very bright, as it might be, for example, a
customer who walks into a store with behind an exterior very bright.
AREA - Here it is possible to set the image area on which it will operate the backlight
compensation, ie the area where the image will be present to highlight the subject compared to
the background. The camera, regardless of background brightness will try to optimize the viewing
area selected. The yield accurate adjustment by the presence of 48 selectable quadrants. The
BLC area adjustment lets you use the backlight compensation even with subjects that are not
found in the middle of the recovery.
SENS - Set
level of compensation.
The higher the level the more it will improve the vision of the subject and penalized the vision of
the bright background.
Enhancer
Here it is possible to increase the horizontal compensation gain (H) and vertical (V)
Zoom-Focus
In this section there are the lens controls
DIGITAL ZOOM - The camera has an optical zoom of 22x (up to 82.8 mm focal length) to
which you can add an additional digital zoom up to 10x. Here you select the maximum value of
digital zoom 2x to 10x.
ZOOM SPEED - Zoom Movement Speed FOCUS SPEED - Speed of movement of the
focus.
