Document:
RE-BCC8YK2 1C4
Document:
RE-BCC8YK2 1C4
Document:
RE-BCC8YK2 1C4
Page:
3
Page:
3
OWNER'S MANUAL
RE-BCC8YK2 camera license plate
DSE srl - Digital Surveillance Equipment - WWW.DSE.EU
Address
Int. 1
Int.2 Int.3 Int.4 Int.5
1
OFF
OFF OFF OFF OFF
2
ON
OFF OFF OFF OFF
3
OFF
ON OFF OFF OFF
4
OFF
ON ON OFF OFF
5
OFF
OFF
ON OFF OFF
6
ON
OFF
ON OFF OFF
7
OFF
ON ON OFF OFF
8
ON
ON ON OFF OFF
9
OFF
OFF OFF
ON OFF
10
ON
OFF OFF
ON OFF
11
OFF
ON OFF ON ON
12
ON
ON OFF
ON OFF
13
OFF
OFF
ON ON OFF
14
ON
OFF
ON ON OFF
15
OFF
ON ON ON OFF
16
ON
ON ON ON OFF
17
OFF
OFF OFF OFF
ON
18
ON
OFF OFF OFF
ON
19
OFF
ON OFF OFF
ON
20
ON
ON OFF OFF
ON
21
OFF
OFF
ON OFF
ON
22
ON
OFF
ON OFF
ON
23
OFF
ON ON OFF
ON
24
ON
ON ON OFF
ON
25
OFF
OFF OFF
OR NOT
26
ON
OFF OFF
OR NOT
27
OFF
ON OFF
OR NOT
28
ON
ON OFF
OR NOT
29
OFF
OFF
ON ON ON
30
ON
OFF
ON ON ON
31
OFF
ON ON ON ON
32
ON
ON ON ON ON
The settings
of
the camera factory
there
RS485 communication are: Pelco D Protocol
SPEED '9600 bps ADDRESS: 1
The keyboard commands available for Pelco D Protocol are as follows:
Call PRESET 101..106
- Recalling presets 101 to 106 is set to the shooting mode from 1 to 6.
Call PRESET 101..106
- Recalling presets 101 to 106 is set to the shooting mode from 1 to 6.
Call 200 PRESET
- With this command gives you access to the remote modification of the IR LED
Call 200 PRESET
- With this command gives you access to the remote modification of the IR LED
brightness. When you enter the preset 200 act on the joystick by moving it up and down to
change the power of the LEDs. Check the result on the monitor.
Richimare PRESET 201
- This command ends the LED brightness adjustment and save the
Richimare PRESET 201
- This command ends the LED brightness adjustment and save the
setting.
PROBLEMS AND SOLUTIONS
Image B / W day
- lit illuminators, adjust IR activation threshold. If the image is B / N IR off the
Image B / W day
- lit illuminators, adjust IR activation threshold. If the image is B / N IR off the
IR filter is in the wrong position due to mechanical shock, deenergize and restore control
camera, then secure it more solidly.
IR LED does not light up at night
- Adjust the ignition threshold. Avoid strong light sources in
IR LED does not light up at night
- Adjust the ignition threshold. Avoid strong light sources in
the vicinity.
Glare on the plate
- Avoid lights directly oriented towards the camera (min 30 °)
Glare on the plate
- Avoid lights directly oriented towards the camera (min 30 °)
The plate is moved
- Check goal setting. Increasing the shutter speed to 1/1000 or 1/1500
The plate is moved
- Check goal setting. Increasing the shutter speed to 1/1000 or 1/1500
Targa too bright or dark at night
- Adjust the power of the LEDs according to the shooting
Targa too bright or dark at night
- Adjust the power of the LEDs according to the shooting
distance
The power of LEDs varies after a reset
- Confirm the IR power setting by pressing the mini
The power of LEDs varies after a reset
- Confirm the IR power setting by pressing the mini
joystick
The plate is too small and you can not read
- Increase the zoom lens to focus the shot.
The plate is too small and you can not read
- Increase the zoom lens to focus the shot.
TECHNICAL FEATURES
www.dseitalia.it/dati_telcavo.htm