17
16
Simple recording
Load a cassette with its safety tab in
place
(see page 23).
Press to start your recording.
Press if you want to stop the
recording for a short while.
Press to continue recording.
Press to stop your recording.
Press
PR+
or
PR-
to choose the
station you want to record.
Press
SP/LP
if you wish to double
the length of the cassette’s recording
time.
For example, on an E-240 cassette you can
record for up to four hours when SP is
displayed, or up to eight hours when LP is
displayed.
STOP SP PR01 ARD
VCR
VCR
VCR
These buttons are used
on the following two
pages.
VCR SETUP
CLOCK SET
LANGUAGE SET
RF OUTPUT SET
16:9 SET
OSD ON/OFF
PR+/-:SELECT
OK:CONFIRM MENU:END
OSD ON/OFF
ON
OFF
PR+/-:SELECT
OK:CONFIRM MENU:END
OSD (On Screen Display) ON & OFF
This VCR is set to “OSD (On Screen Display) ON” mode at the factory, but you can change it to OFF
mode. When a function is changed at the front display or remote control the change will be
displayed on the screen.
Press
MENU
.
Choose “VCR SETUP”
And press
OK
.
Choose “OSD ON/OFF”.
If you want OSD OFF mode, press
PR-
and press
OK
.
OSD characters will not be displayed in the normal
picture at the start of each mode change.
1
2
3
MAIN MENU
TIMER PROGRAM
PR PRESET
VCR SETUP
TAPE CONTROL
PR+/-:SELECT
OK:CONFIRM MENU:END
*
Though the ”16:9 SET” is displayed on the screen, this function is not available for this set.
*
