DSE Flower Effect Moving Head, User Manual, Page: 16 / 18

15
4.How to control Unit with ArtNet
1.
Setting IP Address, choose MANUAL SET to manual input IP address, better
choose ON IP2 or ON IP10 auto set.
2.
IP Mask , input 255.0.0.0
3.
Universe choose OFF or 1
4.
Source select , input signal selection, there are three options:
DMX only → input signal is DMX
Art-Net → input Art-Net signal
DMX & Art-Net → Simultaneous input DMX & Art-Net signal
NOTICE:

If Select DMX only or Art-Net , Channels mode only can choose Standard or
Shape RGB or Shape RGBW . Then only have DMX or Art-Net signal separately
control Pan/Tilt, Dimmer and RGBW, etc.
 If select DMX & ArtNet , means simultaneously controlled by DMX and Art-Net,
and Art-Net only control RGBW Channels, DMX control others channels,
meantime,
CH MODE only can choose DMX & Artnet RGB or DMX & Net
RGBW.
For example, if now choose DMX & Artnet RGB CH Mode, then CH 1 - CH13 are
controlled by DMX, RGB matrix controlled by Art-Net.
5.
When fixtures signal input select Art-Net or DMX & Art-Net, means selected Art-
Net controller to control fixtures. But Art-Net controller also need set the same IP
address, IP MARK as fixtures.
Setting via menu
ON IP2
ON IP2
DMX Controller
Pan/Tilt,dimmer
Strobe etc.
Art-Net controller
R/G/B/W image data
DMX only
Art-Net
→ → →
Standard
Shape RGB
Shape RGBW
SIGNAL INPUT
CH MODE
DMX & Art-Net
DMX & Artnet
RGB
DMX&Net RGBW