USER MANUAL
DIGITAL VIDEO DR-N4 / 8/16
Page: -
52 -
Page: -
52 -
Page: -
52 -
DSE srl - ITALY - WWW.DSE.EU
The description of icons from left to right is as follows:
• Parameters: Access to the DVR programming
• Talk-back: active two-way audio only on CHANNEL 1, activate the microphone and your PC
speakers, connect the microphone and speakers DVR
• Playback: Browse and play the recorded files.
• Device log: View the event memory of the DVR (LOG) and allows you to export it.
• Local storage: Click to set the storage directory of recorded files and the captured frames.
• multivision Windows: Click to change the view of the cameras: full screen
/ 1 camera
/ 4 cameras
/ 8
cameras
/ 9 cameras
etc.
there are the following indications Under the toolbar:
Current User, Log-out, restart DVR remotely, Clear signaling alarms 7 PTZ Control
Current User, Log-out, restart DVR remotely, Clear signaling alarms 7 PTZ Control
With this panel you control the movements of speed dome cameras after selecting the camera full screen.
Refer to the chapter on the PTZ Control 4.8 for the list of available commands.
6.4 Alarm notification
The Internet Explorer interface is able to seganalare events and anomalies that occur in the connected DVR. The
alarm messages appear at the top right of the screen
If the connection with the DVR fails will read NO HEARTBEAT OF DEVICE PLEASE CHECK
THE NETWORK.
If there is an input or motion detection alarm occurs the alarm indication.
CAUTION. Because notification of alarms browser functions must be enabled option on the UPLOAD DVR alarm
menu.
6.5 Remote DVR Programming
The Internet Explorer interface allows you to configure the DVR remotely. Press
PARAMETERS
top left.
The Internet Explorer interface allows you to configure the DVR remotely. Press
PARAMETERS
top left.
The Internet Explorer interface allows you to configure the DVR remotely. Press
PARAMETERS
top left.
