USER MANUAL
DIGITAL VIDEO DR-N4 / 8/16
Page: -
15 -
Page: -
15 -
Page: -
15 -
DSE srl - ITALY - WWW.DSE.EU
4. Before ignition and basic operations
4. Before ignition and basic operations
4.1 Information on the live video
Turn on the DVR and wait for the completion of the start-up. If the hard disk is not installed, the buzzer will signal and a
message appears on the screen.
Before you can perform any operation on the DVR you have to login with the Log In procedure. Press the right mouse
Before you can perform any operation on the DVR you have to login with the Log In procedure. Press the right mouse
button or the ESC button on the keyboard, or even the LOGIN button with the padlock on the remote control: the login
window will appear.
WARNING - If the configuration menu does not appear on the screen to see the previous section and
press ESC + 1 + ESC.
The default password is as follows.
Admin: 888888 User:
666666
You can use these settings unchanged to use the system for the first time and become familiar with the system, only to
change them in the configuration.
If the user had forgotten administrator password, there is a hardware reset procedure to see later.
You can enter up to 7 users: an administrator and six users with different levels of fully configurable access.
To turn off your DVR, press the POWER button icon in the menu bar, enter the password to turn off, then bring back
the ON / OFF switch to OFF.
