USER MANUAL
DIGITAL VIDEO RECORDER DR-N16
Page: -
40 -
Page: -
40 -
Page: -
40 -
DSE srl - ITALY - WWW.DSE.EU
that will start recording when activated
•
Duration
- defines how long (in seconds) remain active the alarm output and the buzzer (acoustic
Duration
- defines how long (in seconds) remain active the alarm output and the buzzer (acoustic
signal) from the time in which it activates the alarm input device. However, the alarm output and the
buzzer will be reset when the alarm input device turns off. Press the buttons
+ / -
to change the duration of time (from 3 to 60 seconds).
+ / -
to change the duration of time (from 3 to 60 seconds).
•
Goto Preset
- If using speed dome cameras you can set the preset to display when you activate the
Goto Preset
- If using speed dome cameras you can set the preset to display when you activate the
alarm input device. The camera will rotate combined entrance to the default preset upon activation
input.
•
Pre-registration
- it defines how long, prior to activation of the alarm input device, the
Pre-registration
- it defines how long, prior to activation of the alarm input device, the
pre-registration to the frame rate previously set in the camera settings must be activated (IPS).
Press +/- buttons to change the value (from 0 to 10 seconds).
•
After Recording
- it defines how long, after the alarm input device activation, must continue
After Recording
- it defines how long, after the alarm input device activation, must continue
recording the frame rate set in the camera settings IPS (IPS). Press +/- buttons to change the value
(from 0 seconds to 60 minutes).
•
alarm output
- defines whether the alarm output will remain active at the moment when an alarm
alarm output
- defines whether the alarm output will remain active at the moment when an alarm
input device is activated. Press +/- buttons to select which alarm output enable (1-2), or to turn off
the alarm output (N / A).
•
Buzzer
- to activate the acoustic signal in the moment in which it activates the alarm input device. to
Buzzer
- to activate the acoustic signal in the moment in which it activates the alarm input device. to
press
ENTER
or the +/- keys to select this option or not.
press
ENTER
or the +/- keys to select this option or not.
press
ENTER
or the +/- keys to select this option or not.
•
Log
- To decide whether to store the LOG in the DVR events activations of the alarm inputs .. Press
ENTER
Log
- To decide whether to store the LOG in the DVR events activations of the alarm inputs .. Press
ENTER
Log
- To decide whether to store the LOG in the DVR events activations of the alarm inputs .. Press
ENTER
or the +/- keys to toggle this option.
•
Message
- to see on screen the warning message for activating the alarm input device. to press
ENTER
Message
- to see on screen the warning message for activating the alarm input device. to press
ENTER
Message
- to see on screen the warning message for activating the alarm input device. to press
ENTER
or the +/- keys to toggle this option.
•
- to send an e-mail address set in view of the activation of the alarm input device. to press
ENTER
- to send an e-mail address set in view of the activation of the alarm input device. to press
ENTER
- to send an e-mail address set in view of the activation of the alarm input device. to press
ENTER
or the +/- keys to toggle this option.
