USER MANUAL
DIGITAL VIDEO RECORDER DR-N16
Page: -
33 -
Page: -
33 -
Page: -
33 -
DSE srl - ITALY - WWW.DSE.EU
•
Camera This. 1..16
Press these buttons to select the camera.
•
CALL / BACK UP
Press this button to copy all the settings of a camera in all the following cameras.
•
ESC
Press this button to exit and return to the SETTINGS MENU. If you submit a confirmation Save
screen, press
ENTER
to exit and save,
ESC
to exit without saving.
screen, press
ENTER
to exit and save,
ESC
to exit without saving.
screen, press
ENTER
to exit and save,
ESC
to exit without saving.
screen, press
ENTER
to exit and save,
ESC
to exit without saving.
screen, press
ENTER
to exit and save,
ESC
to exit without saving.
Below is a brief description of each item and its specific actions:
•
Duration
- defines how long (in seconds) remain active the alarm output and the buzzer (acoustic
Duration
- defines how long (in seconds) remain active the alarm output and the buzzer (acoustic
signal) from the time in which there is a lack of signal for the camera in question. However, the
alarm output and the buzzer will be reset when the camera returns to transmit the video signal.
Press +/- buttons to change the duration time (3 to 60 seconds).
•
Pre-registration
- to define how long before video loss, the relevant camera pre-registration must
Pre-registration
- to define how long before video loss, the relevant camera pre-registration must
be activated. The period of pre-registration, often significantly, you can set as above a frame rate
(IPS) accurate, generally greater than normal recording. Press +/- buttons to change the value (from
0 to 10 seconds).
•
alarm output
- defines whether the alarm output will remain active at the moment in which they
alarm output
- defines whether the alarm output will remain active at the moment in which they
present a lack of video signal into the camera in question. Press +/- buttons to select which alarm
output to activate (1-2) or to disable the alarm (N / A).
•
Buzzer
- to activate the tone when he has a lack of video signal in the camera in question. to press
ENTER
Buzzer
- to activate the tone when he has a lack of video signal in the camera in question. to press
ENTER
Buzzer
- to activate the tone when he has a lack of video signal in the camera in question. to press
ENTER
or +/- buttons to select this option or not.
•
Log
- to record whether or not the video events lost in the DVR event log. to press
ENTER
or +/- to
Log
- to record whether or not the video events lost in the DVR event log. to press
ENTER
or +/- to
Log
- to record whether or not the video events lost in the DVR event log. to press
ENTER
or +/- to
Log
- to record whether or not the video events lost in the DVR event log. to press
ENTER
or +/- to
toggle this setting.
•
Message
- to see or not to see the message of the video loss. to press
ENTER
or the +/- keys to toggle
Message
- to see or not to see the message of the video loss. to press
ENTER
or the +/- keys to toggle
Message
- to see or not to see the message of the video loss. to press
ENTER
or the +/- keys to toggle
Message
- to see or not to see the message of the video loss. to press
ENTER
or the +/- keys to toggle
this option.
