DSC PDigital Security PC1565, Installation Manual, Page: 48 / 56

Programmable Labels
Zone labels and other LCD display identifiers can be customized to
make operation of the system easier for the end user. The following
procedure should be used for creating all LCD labels:
1. Enter Installer’s Programming. Enter the three-digit section num-
ber for the label to be programmed.
2. Use the arrow keys (<>) to move the underline bar underneath
the letter to be changed.
3. Press the number key [1] to [9] corresponding to the letter you
require. The first time you press the number the first letter will
appear. Pressing the number key again will display the next letter.
Refer to the following chart:
[1] - A, B, C, 1 [6] - P, Q, R, 6
[2] - D, E, F, 2 [7] - S, T, U, 7
[3] - G, H, I, 3 [8] - V, W, X, 8
[4] - J, K, L, 4 [9] - Y, Z, 9,0
[5] - M, N, O, 5 [0] - Space
4. When the required letter or number is displayed use the arrow
keys (<>) to scroll to the next letter.
5. When you are finished programming the Zone Label, press the [*]
key, scroll to “Save,” then press [*].
6. Continue from Step 2 until all Labels are programmed.
[001] to [064] Zone Labels (14 Characters)
Default: “Zone 1” - “Zone 64”
[065] Fire Alarm Label (14 Characters)
Default: “Fire Zone”
I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I
[066] Fail to Arm Event Message
Default: “System Has Failed to Arm”
I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I
[067] Alarm When Armed Event Message
Default: “Alarm Occurred While Armed < >”
I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I
[070] First User Display Mask
Default Option ON OFF
ON
I_______I
1 Hold [P]anic Keys prompt ON Hold [P]anic Keys prompt OFF
ON
I_______I
2 Zone Bypassing prompt ON Zone Bypass prompt OFF
ON
I_______I
3 Troubles prompt ON Troubles prompt OFF
ON
I_______I
4 Alarm Memory prompt ON Alarm Memory prompt OFF
ON
I_______I
5 Door Chime Control prompt ON Door Chime Control prompt OFF
ON
I_______I
6 Access Codes prompt ON Access Codes prompt OFF
ON
I_______I
7 User Functions prompt ON User Functions prompt OFF
ON
I_______I
8 Output Control prompt ON Output Control prompt OFF
[071] Second User Display Mask
Default Option ON OFF
OFF
I_______I
1 Installer Programming prompt ON Installer Programming prompt OFF
ON
I_______I
2 Stay Arm prompt ON Stay Arm prompt OFF
ON
I_______I
3 Quick Arm prompt ON Quick Arm prompt OFF
ON
I_______I
4 Interior Arm prompt ON Interior Arm prompt OFF
OFF
I_______I
5 Quick Exit prompt ON Quick Exit prompt OFF
ON
I_______I
6 View Event Buffer prompt ON View Event Buffer prompt OFF
OFF
I_______I
7 For Future Use
OFF
I_______I
8 Music Input ON Music Input OFF
[072] Third User Display Mask
Default Option ON OFF
ON
I_______I
1 System Test prompt ON System Test prompt OFF
ON
I_______I
2 Time and Date prompt ON Time and Date prompt OFF
ON
I_________I
3 Auto-arm Control prompt ON Auto-arm Days prompt OFF
ON
I_________I
4 Auto-arm Time prompt ON Auto-arm Time prompt OFF
ON
I_________I
5 Download Enable prompt ON Download Enable prompt OFF
ON
I_________I
6 Bright Control prompt ON Bright Control prompt OFF
ON
I_________I
7 Contrast Control prompt ON Contrast Control prompt OFF
ON
I_________I
8 Buzzer Control prompt ON Buzzer Control prompt OFF
[073] Downloaded LCD Message Duration
Default: 003
I_______I_______I_______I
(Valid entries are 000-255, 000=Unlimited Message Display. This number represents the number of
times the Downloaded message is cleared by pressing any key while the message is up after timeout)
[074] Key Options
Default Option ON OFF
ON
I_______I
1 [F]ire Keys enabled [F]ire Keys disabled
ON
I_______I
2 [A]uxiliary Keys enabled [A]uxiliary Keys disabled
ON
I_______I
3 [P]anic Keys enabled [P]anic Keys disabled
OFF
I________I
4-8 For Future Use