5
S E T U P & W I R I N G
2.6 Connecting an X-10 Powerflash Module to the PC5102-433
When connecting an X-10 Powerflash module to the PC5102-433, different lights
within or outside the home can be controlled, such as table lamps, or porch and
driveway lights that illuminate the entry / exit paths.
This can be done by setting up the system and wireless key in one of several ways:
• The wireless key can toggle an output ON/OFF, triggering the X-10
Powerflash module, providing direct control of lighting.
• The wireless key can turn on an output for a programmable amount of time (5
seconds to 99 minutes and 99 seconds), turning on lights for the amount of
time the homeowner requires.
• The PC5102 output can be programmed to follow a main panel output which
can turn on lights when the panel is armed and turn them off when disarmed,
turn on lights when an alarm occurs and turn them off when disarmed, etc.
Please refer to the control panel
Installation Manual for a listing of available
output types and their function. PGM 1 and/or PGM 2 on the PC5102-433
can be set up for this operation (see Section 4.1).
NC2
ANT1
GRN
YEL
BLK
RED
COM2
NO2
COM1
NC1
NO1
X-10
Powerflash
Module
Lamp
Module