13
G
Contact ID Page
This page will allow you to set up the Contact ID function.
Telephone numbers to call
Four telephone numbers of up to 20 digits (digits and + signs).
This Device will try each telephone number 3 times before considering a call unsuccessful and quitting.
,
,
,
,
,
The Contact ID Codes will be sent to the first number (with Contact ID reporting protocol) that answers the call.
Events description
z
Customer Code
- type in a 4 character code (accepted values: digits and the letters A, B, C, D, E and F).
To send the SMS it is necessary enter a Customer Code (e.g. 1111) for the relevant event.
z
Event Code -
type in the
Contact ID to be transmitted when the respective event occurs.
z
Send -
select (tick) the events to be sent.
Contact ID default
Click on this button to assign the following Event Codes to the events manage by this Device.
Event Description
Event Code
Sur-Gard System III / II Description
Input 1 activation
E
110
FIRE ZONE 001
Input 1 Restoral:
R
110
FIRE ZONE 001
Input 2 activation:
E
120
Panic Alarm ZONE 002
Input 2 Restoral:
R
120
Panic Alarm ZONE 002
Input 3 activation:
E
130
Burglary ZONE 003
Input 3 Restoral:
R
130
Burglary ZONE 003
Input 4 activation:
E
150
24 HOUR (AUXILIARY) ZONE 004
Input 4 Restoral:
R
150
24 HOUR (AUXILIARY) ZONE 004
PSTN Line down:
E
351
TELCO 1 FAULT 000
PSTN Line Restoral:
R
351
TELCO 1 FAULT 000
12V INPUT LOSS:
E
337
EXP. MOD. DC LOSS 000
12V INPUT RESTORAL:
R
337
EXP. MOD. DC LOSS 000
LOW BATTERY ALERT:
E
338
EXP. MOD. LOW BAT 000
LOW BATTERY RESTORAL:
R
338
EXP. MOD. LOW BAT 000
PERIODIC REPORT:
E
603
Periodic RF Xmission 000
GSM UNIT ACTIVATION:
R
552
Radio Xmitter Disabled 000
GSM INTERNAL BUFFER FULL:
E
624
EVENT LOG OVERFLOW 000
FTC EVENT:
E
354
FAILURE TO COMMUNICATE 000
FTC RESTORAL:
R
354
FAILURE TO COMMUNICATE 000
Send over GPRS
If this option is enabled, this Device will only communicate Contact ID events via the GPRS network.
Periodic Reports
This Device can be programmed to send Periodic Contact ID reports. This section will allow you to select the
Date
and
Time
of the first
periodic report and the
Interval
between reports.
If the external power supply (connected to terminals [+12V]) and battery power supply drop at the same time, the Device
must be re-programmed after the power supply is restored, otherwise the time set for the Periodic Report could NOT be
respected.
Summary of Contents for GS3055-IG
