16
8. Switch on the device on a low blower setting and a high temperature setting.
9. You should now blow-dry each strand individually using a brush until smooth.
10. Finish off on temperature setting
1
and cool down your hair.
Styling
5. Plug the hair-styling nozzle onto the air outlet opening. It must engage audibly.
6. Switch on the device on a low blower setting and a high temperature setting.
7. Shape each strand individually, e.g. using a round brush, and blow-dry it as you do so.
8. Once you have shaped a strand to the style you want, press the
❆
cool shot button and
fi
x
the strand in place with cold air.
Styling Curls and Waves
5. Plug the diffuser attachment onto the air outlet opening. It must engage audibly.
6. Switch on the device on a low blower setting and a high temperature setting.
7a. With short to medium-length hair guide the diffuser over the head in small circular move-
ments. Proceed section by section here.
7b. Long hair should
fi
rst be dried at the tips by placing sections of it on your
fi
ngers. Then guide
each individual section towards your head with the diffuser and leave it there for a while.
Move the diffuser over your scalp in small circular movements.
8. Fix the sections of hair in place with cold air by pressing the
❆
cool shot button or switching
over to temperature setting
1.
Overheating Protection
The device is equipped with an overheating protection feature that switches off the device when
there is overloading, e.g. if the air outlet or intake opening is covered with
fl
uff and hair.
1. If the device stops working during operation, switch it off and remove the plug from the plug
socket.
2. Check whether the air outlet and intake opening are blocked. If this is the case, remove the
blockages. To do this, remove the air inlet grille from the intake opening: Press the locking
mechanism towards the grille and
fl
ip it up. Insert it again after cleaning (see the "After Use"
chapter).
3. Wait for 5 to 10 minutes before you connect the device to the mains power again and switch
it on.