EN
Instructions
Customer Service / Importer:
DS Produkte GmbH, Am Heisterbusch 1, 19258 Gallin, Germany •
✆
+49 38851 314650 *)
*) Calls to German landlines are subject to charges. The cost varies
depending on the service provider.
All rights reserved.
Dear customer,
We are delighted that you have decided to purchase our
spray mop.
Prior to using the product for the
fi
rst time, please carefully read
through the operating instructions and store them in a safe place.
Please note that the illustrations in these instructions may
differ slightly from the actual product.
If you have any questions, please contact customer service via our
website:
www.service-shopping.de
Explanation of Symbols
Safety instructions: Please read these carefully and
comply with them in order to prevent personal injury and
damage to property.
Supplementary information
40 °C Delicate wash
Do not treat with solvents
Do not bleach
Do not dry in a tumble dryer
Do not iron
Important notes
■
This product is designed for wet mopping all kinds of surfaces
(
fl
oors, stairs etc.).
■
The product is designed for private use and is not intended for
commercial use. Only use it as described in the instructions.
Any other use is deemed improper.
■
Danger of suffocation!
Keep children and animals away from
the packaging material.
■
Only use accessories from the manufacturer.
■
Protect the device from heat sources, naked
fl
ames, sub-zero
temperatures, direct sunlight and impacts.
Product contents
1 x Cleaning head
1 x Cleaner tank
2 x Pole
3 x Cleaning cloth
1 x Instructions
Product overview
1
2
3
4
5
7
8
1
Handle
2
Spray trigger
3
Upper pole
4
Lower pole
5
Cleaner tank (approx.
600 ml)
6
Spray head
7
Spray nozzle
8
Cleaning head with
cleaning cloth
6
Before
fi
rst use
Any water residue in the cleaner tank is due to the fact that
the product was tested after assembly and is not a defect.
• Unpack all parts and remove all protective foils and stickers.
Check the product contents for any damages from transport.
Should you identify any transport damages, do not use the pro-
duct (!), instead please promptly consult the customer service.
• Assemble the mop by
fi
rst inserting the upper pole (
3
) into the
bottom pole (
4
) until it audibly locks into place and then in-
sert the upper pole (
3
) into the pole receptacle on the cleaning
head (
8
) until it audibly locks into place. Your mop is now ready
for use!
Use
ATTENTION!
■
When cleaning laminate
fl
oors, make sure that you do not
spray too much liquid cleaner on the
fl
oor. Otherwise it could
cause it to swell up!
1. Open the cleaner tank (
5
) by screwing its lid off.
2. Fill the cleaner tank (
5
) with water or a cleaner of your choice.
3. Screw the lid back onto the cleaner tank (
5
).
4. Insert the cleaner tank (
5
) into the receptacle on the spray
head (
6
).
5. Af
fi
x the cleaning cloth to the cleaning head (
8
) with the hook-
and-loop fastener.
6. Now mop your
fl
oors as usual by moving the cleaning head (
8
)
across the area you wish to clean and pressing the spray trig-
ger (
2
) as needed to dampen the
fl
oor using the spray noz-
zle (
7
).
7. Fill the cleaner tank (
5
) if it is empty and, if necessary, wash the
cleaning cloth out with hot water in between.
Cleaning and storage
ATTENTION!
■
Do not use any scouring or abrasive cleaners or cleaning pads
for cleaning.
■
Only air dry the cleaning cloth; do not in any case machine dry
it or dry it with a hair dryer!
• Clean the mop with a damp cloth and mild cleaner as needed.
• You can wash the cleaning cloth in the washing machine.
Do
not use any softener as it may reduce the suction power
of the cleaning cloth!
Make sure you follow the instruc-
tions on the cleaning cloth’s washing label.
Then let the
cleaning cloth air dry.
Disposal
Dispose of the packaging material in an environmentally
friendly manner and take it to a recycling centre. Dispose
of the product in an environmentally-friendly manner, too.
For more information, contact the administrative body in
your community.
Z 08429 M DS V1 0618
Article number: 08429
