![background image](http://html.mh-extra.com/html/ds-produkte/06448/06448_instruction-manual_2533415018.webp)
EN
18
9. Remove the thermo cup and put the cover onto the thermo cup. The lid has a drin-
king aperture. Simply push the lid cover forward or backward to open or close the
drinking aperture.
10. After use, clean the device as described in the chapter “Care and decalcifying”.
Care and decalcifying
NOTE
■
Before commencing the cleaning, note the safety instructions in the “Safety
Instructions” chapter!
■
When cleaning, do not use any corrosive or abrasive cleaners. They could damage
the surface.
1. Ensure that the device is switched off and disconnected from the power supply!
2. Take the permanent
fi
lter and the permanent
fi
lter holder out of the
fi
lter compart-
ment and dispose of the used coffee pad/coffee grounds.
3. Clean the permanent
fi
lter, permanent
fi
lter holder and thermo cup with hot water
and, if necessary, a small amount of mild detergent.
4. Then thoroughly dry the permanent
fi
lter, permanent
fi
lter holder and thermo cup.
5. Place the permanent
fi
lter and the permanent
fi
lter holder back in the coffee maker
once they are completely dry.
6. When needed, wipe off the coffee maker with a damp cloth and dry it with a dry cloth.
Decalcifying
You should decalcify the device if water is only circulating very slowly or the device is
making more noise than usual during the brewing process. Use a commercially-availa-
ble decalci
fi
er for coffee makers for decalci
fi
cation.
1. Fill the water tank with a mixture of water and decalci
fi
er and turn the device on.
Consult the decalci
fi
er instruction manual to determine the correct ratio of water to
decalci
fi
er.
2. Let the mixture completely circulate through the device. Repeat the process if the
water still circulates slowly.
3. After you have
fi
nished decalcifying the device, allow water to circulate through the
device at least three times (without coffee grounds/a coffee pad) in order to rinse
the lines etc.
Technical data
Model:
CM-111A
Voltage supply:
220 – 240 V~ 50 / 60 Hz
Output:
650
–
750
W
Safety class:
I
SKMEST_DE-EN-FR-NL_A5_V4.indb 18
SKMEST_DE-EN-FR-NL_A5_V4.indb 18
11.12.2017 14:54:29
11.12.2017 14:54:29