![background image](http://html.mh-extra.com/html/ds-produkte/01505/01505_instruction-manual_2533514014.webp)
EN 14
Use
CAUTION!
■
Always check the device for damage before putting it into operation. Only use it if the
device, mains cable and mains plug have no signs of damage!
■
Beware of burns!
The protective grille and all metal parts on the front of the device
are hot during operation and for some time afterwards. During operation, only touch
the device by the carrying handle and the switches.
■
Warning of
fi
re!
Keep combustible materials away from the device. Furnishings such
as upholstered furniture or curtains should be a minimum of 1 m away from the heat-
ing surface of the device. A minimum gap of 0.5 m should be maintained at the back
of the device.
■
Warning of
fi
re and damage to property!
Do not operate the device unattended so
that you can intervene immediately in the event of any faults.
The safety switch (
6
) on the bottom of the base (
5
) ensures that the device is
switched off automatically if it is not in contact with the ground.
The device is equipped with overheating protection; it switches off if it overheats.
In this case,
fl
ip the
main switch (
11
) to the
0
position, pull out the mains plug
and allow the device to cool down. It will be ready for use again after approx.
10 – 15 minutes.
1. Place the device on a dry, level,
fi
rm and heat-resistant surface.
2. Insert the mains plug into a properly installed plug socket that is easily accessible.
3. Flip the main switch (
11
) to position
I
. The “
fi
replace look” lighting (
2
) is switched
on behind the window (
1
). The device functions can only be activated if this switch is
fl
ipped to
I
.
4. To switch on the heating function,
fl
ip the switch for heating level 1 (
10
) to the
I
position. To increase the level of heating,
fl
ip the switch for heating level 2 (
9
) to
the
II
position.
NOTE:
Heating level 2 can only be added if heating level 1 is switched
on.
Flip back the respective switch to switch off the heating levels.
5. The swivel function can be switched on and off with the switch (
8
). This is
independent of the heating function.
6. Remove the mains plug from the plug socket after use.