SL27 / 679185 Instruction Manual
17 of 19
Removing a “Wrap-Around” (cont’d)
For extreme wrap-arounds (i.e. when film and/or product have wrapped around the rubber
rollers several times) it may be helpful to follow this procedure:
Shut the machine off! DryLam Model SL27 and School Smart model 679185 have set screws
at both ends of each laminating and pull roller. With the use of a 3/32” hex key (allen
wrench), loosen all four set screws on the pull rollers. Cut the film between the laminating
and pull rollers, grab the loose end and pull. The rollers may rotate freely on the roll shafts
and the “wrap-around” may easily unwrap. Tighten all the set screws and rethread the film.