SL27 / 679185 Instruction Manual
14 of 19
Note: As the diameter of the film roll decreases, tension should be reduced.
To increase tension, turn the adjusting knob clockwise. To decrease tension, turn the knob
counterclockwise. If the tension is not equal top and bottom, the laminated product will curl
or may “bunch up” in the roller area. If the material curls up as it comes out of the machine,
the top roll is probably tighter than the bottom. If it curls down, the bottom roll is probably
tighter.
Note:
Make sure the black tension disks are flat against the side panel. They should be
rotating, both top and bottom, while film is feeding.