26
SETTINGS
Operation mode
A.
Continuous Operation
Press the «POWER» button to turn on the unit.
The unit starts to dehumidify in continuous operation, regardless of the humidity.
The humidity set-point cannot be adjusted in this mode.
B.
Normal Operation
Press «POWER» button to turn on the unit.
Press the «CONT» key to deactivate the continuous mode.
The unit operates in normal mode with the default 50% humidity set-point.
Press «POWER» button again to turn off the dehumidifier.
The fan keeps running for a while and then stops.
Set Humidity (setting range 20%-90%):
The humidity set-point can be adjusted in normal operation.
Press «UP» or «DOWN» repeatedly to adjust humidity set-point.
Set the humidity level between 50% and 60% for comfort.
The unit will cycle on and off to maintain the level.
Timer Setting (1hour-24hours):
The timer has two ways of operation:
To turn off
(When power on)
To turn on
(When power off)
Cancel timer
Water «FULL» Indicator
The machine automatically shuts off once the water tank is full, alerting the user through an
indicator light and buzzing. It reminds you to check:
•
If the water tank is full, empty and re-install the water tank.
•
If the water tank is not in position, the full indicator always on and the unit is inoperative.
•
Re-install the tank correctly, and the unit will auto operating as your last setting.
Press «TIMER» button
to turn on the timer
function.
Press «TIMER» button to
turn on the timer
function
.
Press «UP» or «DOWN»
repeatedly to set the
delay OFF time.
Press «UP» or «DOWN»
repeatedly to set the
delay ON time.
Press «TIMER» again to turn off the timer function.
Note: when press «POWER» will also exit the timer setting.