drybar the brush crush 900-1595-4, Operating Instructions & Safety Manual

Page: 7 / 42

• Check the control panel and do not use if cracked,
split, broken or damaged.
• When not in use for long periods of time, clean and
dry the entire iron using the steps listed below and
store in a cool, dry place. When ready to use, follow the
maintenance steps above, confirming each function
of the iron.
HOW TO CLEAN YOUR BRUSH CRUSH TOOL
While your Brush Crush is completely cool, remove
any hair from the teeth using your fingers. Once all hair
is removed, turn the temperature up to the maximum
(450°F/230°C). Carefully wipe the bristles and base
plate with a thick, smooth-fiber cotton cloth. Use ex-
treme caution to avoid skin contact with the heated
areas during cleaning. Do not use any type of chemicals
to clean your Brush Crush tool.
DEFECTS & MALFUNCTIONS
In case of defects or malfunctions, please consider the
following points before contacting a repair service center:
• The warranty program covers defects in material and
workmanship. Refer to the Warranty Card for details.
• Drybar Products LLC is not responsible for damage
due to operator accidents, such as dropping the iron
on the floor.
• In the event of malfunction, unplug the iron and
follow the instructions on the Warranty Card.