Dry Air TECHNO PRO 5000 Owner'S Manual Download Page 3

TECHNO PRO

 5000 OWNER’S MANUAL 

 

1

Congratulations on your purchase of the 
Techno Pro

 5000.  This dehumidifier 

has been designed to offer you the 
reliability, durability and portability you 
need.   

Your Techno Pro

 5000 removes up to 

110 pints per day at saturation and 60 
pints per day at AHAM. 

The Techno Pro

 5000 includes factory-

installed wheels, handle and automatic 
pump-out system. 

SAFETY INFORMATION 

Caution!

  

Unit operates on alternating 

current: 

110/120 volt, 60 Hz 

Or 230 volt, 50 Hz

 

 

 

Do not operate your Techno Pro

 5000 

Dehumidifier with a cut or frayed power 
cord.  Do not unplug your dehumidifier 
by pulling on its cord.  Grasp the plug 
firmly and pull it out of the wall socket.  
The plug has a safety ground pin 
installed that must not be removed.  If 
the pin is damaged or missing, have the 
power cord replaced at once.  Visually 
inspect the power cord before each use.  
Ignoring these safety precautions may 
result in a fire or an electric shock.  

Never operate electrical equipment in 
standing water.  There is a shock hazard.  

Never drop the unit.  Sudden and severe 
impact may result in damage to internal 
components. 

Your Techno Pro

 5000 Dehumidifier 

should not be operated with the unit’s 
outer cover removed.  Personal injury 
may result. 

Drapes or other loose fabrics can be 
drawn against the unit restricting its 
airflow.  This condition may cause the 
unit to overheat.  Assure that there is 
sufficient space between the back of the 
unit and these fabrics to avoid this 
condition. 

Save the shipping carton in case your 
Techno Pro

 5000 Dehumidifier must 

be returned for repair.  But, discard the 
plastic bag to prevent children from 
using it as a toy.  Also, children should 
not be allowed to play on or near a 
running dehumidifier. 

Never operate your Techno Pro

 5000 

Dehumidifier outside when it is raining 
and never store your dehumidifier 
outside. 

This unit should never be serviced or 
cleaned while it is plugged into a live 
electrical power source. 

Warning! 

Ignoring these safety precautions may 

result in serious personal injury.

 

 
 

OPERATING INSTRUCTIONS  

1.

 

If your unit is equipped with wheels, 

block them to keep the unit from 
accidentally rolling.  Also, secure the 
dehumidifier during transportation to 
prevent its toppling over and to keep 
it upright.  Severe impact may 
damage the compressor or electronic 
components. 

2.

 

In the event that the unit has been 

stored or transported on its side, set it 
upright for at least one (1) hour 
before starting. 

3.

 

Operate your Techno Pro

 5000 only 

on a level surface.  This will prevent 
the unit from spilling condensate or 
flooding the area. 

Summary of Contents for TECHNO PRO 5000












Reviews: