2
Getting Started
Step 1: Assign Devices to HUB
Log in to Ecotopia data center, and click “Device -> Gateway” from the left sidebar menu.
Here you will see your HUB device number (Device ID or UUID). Click to the number and then
click . From the list, you can choose the devices to assign to HUB.
Note:
To protect privacy, HUB can only communicate with devices assigned to it.
You can assign one device to multiple HUBs.
HUB is also displayed in the “Terminal” list, because it also generates its own data like a
tracking device. This part of data is displayed in “Terminal” page.
Step 2: Install Antennas for HUB
Install the three antennas for HUB as shown below.
Step 3: Turn On HUB and Deliver Settings
We recommend that you always turn on a device with your mobile phone connected to network,
especially for the first time of device initialization.
Note
: If you plan to initialize your device in an environment without mobile network, please
make sure you have cached all necessary information in your mobile phone beforehand.
For details, please read “Help > Data Platform > Ecotopia App > Cache Management” on
the datacenter (
https://ecotopiago.com/help/en/#/instruction/App/cache_setting
).
1
）
Authorize Bluetooth to Ecotopia App, and log in with your account.
2
）
On Ecotopia App, tap on top right to scan QR code on HUB, and follow the instructions to
turn them on, and deliver the settings to the device.
Note
: “Setting delivery” is an important step to initialize your device. By doing this, the
device can obtain the fine settings that are suitable for each sub-model. When your App is
